49
HM 6Split
HM 12Split
Section 9 |
Control
Menu 2.2 - comfort mode
The function is activated immediately when a time pe-
riod is selected and confirmed using the OK button.
The remaining time for the selected setting is shown
to the right. When the time has run out controller
returns to the mode set in menu 2.2. Select “off" to
switch off temporary lux .
In this menu, we have the choice of operating modes
for different hot water temperatures. More informa-
tion after selecting "?".
Factory setting:
normal
economy -
This mode gives less hot water than the oth-
ers, but is more economical. This mode can be used
in smaller households with a small hot water require-
ment.
normal -
Normal mode gives a larger amount of hot
water and is suitable for most households.
luxury
- Lux mode gives the greatest possible amount
of hot water. In this mode the immersion heater may
be partially used to heat hot water, which may in-
crease operating costs.
Menu 2.3 - scheduling
Here you can program the hot water temperature.
for two different time intervals throughout the day.
Scheduling is activated/deactivated by ticking/untick-
ing"activated". Set times are not affected at deactiva-
tion. More information after selecting "?".
Factory setting:
off
Schedule:
The schedule to be changed is selected
here.
Activated:
Scheduling for the selected period is acti-
vated here. Set times are not affected at deactivation.
Day:
Select which day or days of the week the sched-
ule is to apply to here. To remove the scheduling for a
particular day, the time for that day must be reset by
setting the start time to the same as the stop time. If
the line "all" is used, all days in the period are set for
these times.
Time period:
The start and stop time for the selected
day for scheduling are selected here.
Adjusting:
Set the hot water comfort that is to apply
during scheduling here.
Conflict:
If two settings conflict with each other a red
exclamation mark is displayed.
ADVICE
If you wish to set similar scheduling for every day of
the week start by filling in “all” and then changing the
desired days.
CAUTION
If comfort mode "luxury" is selected in menu 2.2 no
further increase can be carried out.
smart control
- The Smart control function is activated
in this menu. This function remembers the hot water
consumption in the previous week and adjusts the
temperature in the hot water heater for the upcoming
week to ensure minimal energy consumption.
After activating the Intelligent Steering function, the
heater has a hot water heater offers the performance
given on the energy label.
