![background image](http://html1.mh-extra.com/html/alpha-innotec/hm-12split/hm-12split_installation-and-operating-manual_2906141045.webp)
45
HM 6Split
HM 12Split
Section 9 |
Control
Settings for the user
Menu 1 - Indoor climate
Menu 1.1 - temperature
In this menu you can set the temperature for the
heating system. Status information gives setpoints
for the heating system.
Choose between heating or cooling (if activte) and
then set the desired temperature in the next menu
"temperature heating/ cooling" in menu 1.1. More in-
formation after selecting "?".
Set the temperature (without rooms ensors installed
and activated):
Setting range: -10 do +10
Factory setting:
0
In this menu, you can select the operating mode for
the HM 6Split / HM 12Split unit. More information af-
ter selecting "?".
Factory setting:
auto
In this menu it is possible to activate alarm actions.
More information after selecting "?".
Factory setting:
decrease room temp: inactive
deactivate hot water: inactive
Reminder to complete the checklist in the first chapter
of the user manual.
In this menu, we can decide whether the start guide
will run again the next time the system is started.
CAUTION
Recommended "auto" operating mode. Editing is only
possible by qualified personnel.
15/18 Op mode
16/18 Alarm actions
17/18 Reminder
18/18 Start guide
The menu CLIMATE OF ROOMS is used to modulate
the settings for the heating system.