Allied Telesis AT-x950-28XSQ, Installation Manual

Page: 45 / 190

AT-x950-28XSQ Switch and VCStack Installation Guide
45
Designating Ports in the Command Line Interface
The individual ports on the switch are identified with the PORT parameter
in the command line interface of the AlliedWare Plus management
software. The format of the parameter is shown in Figure 17.
Figure 17. PORT Parameter in the Command Line Interface
The three parts of the PORT parameter are described in Table 14.
Figure 18 identifies the slot numbers for base ports and line card ports.
Figure 18. Slot Numbers for Port Numbering on Stand-alone Switches
Table 14. PORT Parameter Format
Number Description
Switch ID Number Identifies the switch’s ID number, which
identifies the switch in the stack. Each
switch has a unique ID number. Switches
display their ID numbers on the Switch ID
LEDs on the front panels.
Slot Number Identifies whether ports are base ports or
ports on an XEM2 Line Card. Slot number
0 indicates base ports and slot number 1
indicates ports on a line card. Refer to
Figure 18.
Port Number Identifies a port number.
port n.n.n
Slot Number
Port Number
Switch ID Number
Slot Number 1 for
XEM2 Line Card:
portn.1.n
Slot Number 0 for
Base Ports:
portn.0.n