manualshive.com logo in svg

Allied Telesis AlliedWare Plus 5.2.1, Software Reference Manual

The Allied Telesis AlliedWare Plus 5.2.1 Software Reference Manual is a comprehensive guide that provides detailed information and instructions for utilizing the features and functionalities of the product. Visit our manualshive.com to download this manual for free and enhance your experience with Allied Telesis products.

Share
Download
background image

 

©2008 Allied Telesis Inc. All rights reserved.

Software Version 5.2.1

AlliedWare Plus

TM

 Operating System Software Reference  C613-50003-00 REV E

28.1

 

©2008 Allied Telesis Inc. All rights reserved.

Software Version 5.2.1

AlliedWare Plus

TM

 Operating System Software Reference  C613-50003-00 REV E

28.1

 

28 RIP Commands 

Introduction............................................................................................................................................................28.2
accept-lifetime.......................................................................................................................................................28.2
clear ip rip route..................................................................................................................................................28.3
debug rip..................................................................................................................................................................28.4
default-information originate ........................................................................................................................28.4
default-metric ........................................................................................................................................................28.5
distance (rip)..........................................................................................................................................................28.6
distribute-list...........................................................................................................................................................28.7
ip rip authentication key-chain.....................................................................................................................28.8
ip rip authentication mode ............................................................................................................................28.9
ip rip authentication string .......................................................................................................................... 28.10
ip rip receive-packet....................................................................................................................................... 28.10
ip rip receive version...................................................................................................................................... 28.11
ip rip send-packet ............................................................................................................................................ 28.11
ip rip send version ........................................................................................................................................... 28.12
ip rip send version 1-compatible............................................................................................................. 28.13
ip rip split-horizon............................................................................................................................................ 28.13
key ............................................................................................................................................................................ 28.14
key chain ............................................................................................................................................................... 28.15
key-string............................................................................................................................................................... 28.16
maximum-prefix................................................................................................................................................ 28.16
neighbor ................................................................................................................................................................ 28.17
network ................................................................................................................................................................. 28.18
offset-list ................................................................................................................................................................ 28.19
passive-interface................................................................................................................................................ 28.20
recv-buffer-size .................................................................................................................................................. 28.20
redistribute........................................................................................................................................................... 28.21
restart rip graceful............................................................................................................................................ 28.21
router rip .............................................................................................................................................................. 28.22
send-lifetime........................................................................................................................................................ 28.23
show debugging rip......................................................................................................................................... 28.24
show ip protocols rip..................................................................................................................................... 28.24
show ip rip ........................................................................................................................................................... 28.25
show ip rip database ...................................................................................................................................... 28.25
show ip rip interface....................................................................................................................................... 28.26
timers ...................................................................................................................................................................... 28.27
undebug rip ......................................................................................................................................................... 28.28
version.................................................................................................................................................................... 28.28

Summary of Contents for AlliedWare Plus 5.2.1















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AlliedWare Plus 5.2.1

Aastra Venture IP Telephone System Software Manual preview
Venture IP Telephone System
Brand: Aastra Pages: 10
Barracuda Networks NG Network Access Client SP4 Administrator'S Manual preview
NG Network Access Client SP4
Brand: Barracuda Networks Pages: 268
ASCOM TEMS VISUALIZATION 7.2 ENTERPRISE Brochure preview
TEMS VISUALIZATION 7.2 ENTERPRISE
Brand: ASCOM Pages: 8
Avaya C460 SMON Quick Start Manual preview
C460 SMON
Brand: Avaya Pages: 20
Patton electronics SmartNode Series Software Configuration Manual preview
SmartNode Series
Brand: Patton electronics Pages: 655
ARTEX 570-2225 Manual preview
570-2225
Brand: ARTEX Pages: 33
Yamaha Sound Editor ver. 2.10 Installation Manual preview
Sound Editor ver. 2.10
Brand: Yamaha Pages: 11
Yamaha Song Filer Manual preview
Song Filer
Brand: Yamaha Pages: 11
Yamaha mLAN Patchbay Manual preview
mLAN Patchbay
Brand: Yamaha Pages: 17
Yamaha FIRESTATION MLAN PATCHBAY Manual preview
FIRESTATION MLAN PATCHBAY
Brand: Yamaha Pages: 17
Yamaha S03 voice editor Software Installation Manual preview
S03 voice editor
Brand: Yamaha Pages: 20
Yamaha S08 Voice Editor Software Installation Manual preview
S08 Voice Editor
Brand: Yamaha Pages: 24
Yamaha File Utility Manual preview
File Utility
Brand: Yamaha Pages: 28
Yamaha QS1-MC User Manual preview
QS1-MC
Brand: Yamaha Pages: 42
Yamaha QS1-WD User Manual preview
QS1-WD
Brand: Yamaha Pages: 43
Yamaha MOTIF RACK XS Editor Owner'S Manual preview
MOTIF RACK XS Editor
Brand: Yamaha Pages: 53
Yamaha Loopfactory AN200 Service Manual preview
Loopfactory AN200
Brand: Yamaha Pages: 58
Yamaha S03 voice editor Service Manual preview
S03 voice editor
Brand: Yamaha Pages: 67

Brands by name

Popular brands

Load more brands