manualshive.com logo in svg

Allied Telesis AlliedWare Plus 5.2.1, Software Reference Manual, Page: 1159 / 1294

Share
Download
Allied Telesis AlliedWare Plus 5.2.1 Software Reference Manual Download Page 1159

SNMP MIBs

 

©2008 Allied Telesis Inc. All rights reserved.

Software Version 5.2.1

AlliedWare Plus

TM

 Operating System Software Reference  C613-50003-00 REV E

 

56.11

 

Host Resources MIB

RFC 2790, 

Host Resources MIB

, defines a portion of the Management Information Base (MIB) 

for managing host systems.

The term host is construed to mean any computer that communicates with other similar 
computers attached to the internet and that is directly used by one or more human beings. 
Although this MIB does not necessarily apply to devices whose primary function is 
communications services (such as terminal servers, routers, bridges, monitoring equipment), 
this relevance is not explicitly precluded. This MIB instruments attributes common to all 
internet hosts including, for example, both personal computers and systems that run variants of 
Unix.

Objects defined in this MIB reside in the mib(1) subtree (

Figure 56-6

) and have the object 

identifier prefix host ({ mib-2 25 }).

Figure 56-6: The Host Resources subtree of the Internet-standard Management Information Base (MIB)

The MIB is organized into six groups:

■

The Host Resources System group contains objects that describe general system 
configuration parameters.

■

The Host Resources Storage group contains objects that describe the logical storage areas 
on the host.

■

The Host Resources Device group contains objects that describe the devices on the host.

■

The Host Resources Running Software group contains objects that describe the software 
that is running or loaded into physical or virtual memory in preparation for running, 
including the host's operating system, device drivers, and applications.

■

The Host Resources Running Software Performance group contains objects that describe 
performance metrics for each entry in the hrSWRunTable.

■

The Host Resources Installed Software group contains objects that describe each piece of 
software installed in long-term storage (e.g. a disk drive) locally on this host. This does not 
include software loadable remotely from a network server.

icmp (5)

tcp (6)

udp (7)

egp (8)

cmot (9)

snmp (11)

internet (1)

enterprises (1)

directory (1)

private (4)

experimental (3)

mgmt (2)

ifExtensions (12)

appletalk (13)

ospf (14)

MIB5

transmission (10)

host (25)

...

mib-2 (1)

Summary of Contents for AlliedWare Plus 5.2.1















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments