![background image](http://html1.mh-extra.com/html/allied-telesis/alliedware-plus-5-2-1/alliedware-plus-5-2-1_software-reference-manual_2902746112.webp)
File Management Commands
©2008 Allied Telesis Inc. All rights reserved.
7.20
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
Software Version 5.2.1
show file systems
This command lists the filesystems and their utilization information where appropriate.
If this command is entered on the stack master, it will list the file systems for all the stack
members. A stack member heading is displayed to distinguish the different lists shown for each
stack member. If it is entered on a specific stack member, as a host-directed command, it will
list the file systems for only that stack member.
Syntax
show file systems
Mode
Privileged Exec mode.
Output
Figure 7-2: Example output from the
show file systems
command
STACK member 1:
Size(B) Free(B) Type Flags Prefixes S/D/V Lcl/Ntwk
Avail
----------------------------------------------------------------
30.0M 6.7M flash rw flash: static local Y
- - system rw system: virtual local -
499.0k 0 nvs rw nvs: static local Y
- - sdcard rw card: dynamic local N
- - tftp rw tftp: - network -
- - scp rw scp: - network -
- - sftp ro sftp: - network -
- - http ro http: - network -
----------------------------------------------------------------
STACK member 2:
Size(B) Free(B) Type Flags Prefixes S/D/V Lcl/Ntwk
Avail
----------------------------------------------------------------
30.0M 6.7M flash rw flash: static local Y
- - system rw system: virtual local -
499.0k 0 nvs rw nvs: static local Y
- - sdcard rw card: dynamic local N
- - tftp rw tftp: - network -
- - scp rw scp: - network -
- - sftp ro sftp: - network -
- - http ro http: - network -
.
.
.