manualshive.com logo in svg

Allied Telesis AlliedWare Plus 5.2.1, Software Reference Manual, Page: 1268 / 1294

Share
Download
Allied Telesis AlliedWare Plus 5.2.1 Software Reference Manual Download Page 1268

Stacking Commands

©2008 Allied Telesis Inc. All rights reserved.

65.22

AlliedWare Plus

TM

 Operating System Software Reference  C613-50003-00 REV E

Software Version 5.2.1

 

stack renumber

Changes the ID of a specific stack member.

Syntax

For SwitchBlade

®

 x908

stack <1-4> renumber <1-4> [immediate]

For x900 Series switches

stack <1-8> renumber <1-8> [immediate]

Default 

Every stack unit will initially try to use stack member ID of 1.

Mode 

Privileged Exec mode

Usage

This command is used to change the ID of a specific stack member - primarily when exchanging 
stack members. The changes made by this command will not take effect until the switch is 
rebooted.

Note:

This command does not alter any of the stacks's existing configuration, apart from 
the member-ID specified. For example, if stack member 2 were removed from the 
stack and a new stack unit is assigned the member 2 stack ID then the interface 
configuration that existed for the removed stack member 2 will be applied to the new 
stack member 2.

The 

current 

m

e

m

ber ID

 must already be assigned to an existing stack member.To avoid 

duplicating IDs, a warning message will appear if you assign a 

new 

m

e

m

ber ID

 that is currently 

assigned to another stack member. However, you can continue to rename the stack member 
IDs and remove ID duplications. If you do not remove the duplications, then the device with 
the highest root priority will be allocated this ID. Once you have removed any duplicate IDs, 
you can reboot the switch to implement your changes.

To avoid confusion when configuring the stack, we recommend using the 

immediate

 

parameter. This will force a switch reboot enabling the ID changes to take immediate effect. 
The exception to this recommendation applies where you are making multiple ID changes. 

Parameter

Description

stack

Virtual Chassis Stack

<1-8>

The ID of the stack member to be renumbered - also referred to as the 
“current member ID”

renumber

Change the existing stack member ID

<1-4>

 

<1-8>

The new ID of the stack member - also referred to as the 
new member ID.

 

Note that when operating two member stacks, we advise using stack IDs 
1 and 2 for all device types.

immediate

Reboot the unit immediately after renumbering

Summary of Contents for AlliedWare Plus 5.2.1















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments