Allied Telesis AlliedWare Plus 5.2.1 Software Reference Manual Download Page 114

Page: 114 / 1294

File Management Commands

7.22

AlliedWare Plus

Operating System Software Reference C613-50003-00 REV E

Software Version 5.2.1

show license

This command displays license information about a specified licensed software feature, or all
enabled software feature licenses.

Syntax

show license [

<name>

|index

<index-number>

] [brief]

Mode

Exec mode and Privileged Exec mode

Parameters in the output of the show license command

Examples

To display a brief summary of information about all enabled licenses, use the command:

awplus#

show license brief

To display full information about all enabled licenses, use the command:

awplus#

show license

To display full information about the licences with index number 1, use the command:

awplus#

show license index 1

Related Commands

license

Parameter

Description

<name>

The licence name of the software feature to show information
about.

<index-number>

The index number of the software feature to display information
about.

brief

Displays a brief summary of license information.

Output parameter

Output parameter meaning

Index

Index identifying entry

License name

Name of the license key bundle (case-sensitive)

Customer name

Quantity of licenses Quantity of the licenses included in the feature key

Type of license

Full or Temporary

License issue date

Date the key was generated

License expiry date

Expiry date for Temporary feature key

Features include

List of features included in the feature key

Summary of Contents for AlliedWare Plus 5.2.1














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AlliedWare Plus 5.2.1

Reviews:

Allied Telesis AlliedWare Plus 5.2.1, Software Reference Manual, Page: 114 / 1294

Search results

Summary of Contents for AlliedWare Plus 5.2.1

Reviews: