manualshive.com logo in svg

Allied Telesis AlliedWare Plus 5.2.1, Software Reference Manual, Page: 1115 / 1294

Share
Download
Allied Telesis AlliedWare Plus 5.2.1 Software Reference Manual Download Page 1115

SNMP Introduction

 

©2008 Allied Telesis Inc. All rights reserved.

Software Version 5.2.1

AlliedWare Plus

TM

 Operating System Software Reference  C613-50003-00 REV E

 

54.5

 

Names

Names are used to identify managed objects, and are hierarchical in nature. An object identifier 
is a globally unique, authoritatively assigned sequence of non-negative integers which traverse 
the MIB tree from the root to the node containing the object.

Object identifiers may be represented in one of the following forms:

■

Dotted notation lists the integer values found by traversing the tree from the root to the 
node in question, separated by dots. For example, the following identifies the MIB-II sub-
tree:

 

 

1.3.6.1.2.1

 

 

The following identifies the sysDescr object in the system group of MIB-II:

 

 

1.3.6.1.2.1.1.1

■

Textual notation lists the textual descriptions found by traversing the tree from the root to 
the node in question, separated by spaces and enclosed in braces. For following example 
identifies the internet sub-tree:

 

 

{ iso org dod 1}

 

 

The name may be abbreviated to a relative form. The following example identifies the first 
(directory) node of the internet sub-tree:

 

 

{ internet 1}

■

Combined notation lists both the integer values and textual descriptions found by 
traversing the tree from the root to the node in question. The integer value is placed in 
parentheses after the textual description. The labels are separated by spaces and enclosed 
in braces. For example, the following identifies the first (directory) node in the internet 
sub-tree:

 

 

{iso(1) org(3) dod(6) internet(1) 1}

 

 

The name may be abbreviated to the following:

 

 

directory(1)

Since there is no effective limit to the magnitude of non-negative integers, and no effective limit 
to the depth of the tree, the MIB provides an unlimited name space.

An object is also usually assigned an object descriptor. The object descriptor is a unique, 
mnemonic, printable string intended for humans to use when discussing the MIB.

Summary of Contents for AlliedWare Plus 5.2.1















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments