Allen-Bradley SLC 500 Series, Manual

Page: 177 / 269

208
••••
Siemens QUICKDESIGNER
Simatic TI 305
Simatic TI 305 Tag Variable Table
Device Address Data Data Data Data Data Bit Read Description
Prefix Range Range Range Format Width Word write / Write & Notes
Min. Max. Order (y/n/rmw)
32 bit types
RD(2) 400-576 -1E+08 1E+08 S (1) 32 norm n/a R/W Variable double
RD(2) 700-776 -1E+08 1E+08 S (1) 32 norm n/a R/W Variable double
RL(2) 400-576 -1E+08 1E+08 S (1) 32 rev. n/a R/W Variable long
RL(2) 700-776 -1E+08 1E+08 S (1) 32 rev. n/a R/W Variable long
RF 400-576 -1E+08 1E+08 D 32 norm n/a R/W Variable float
RF 700-776 -1E+08 1E+08 D 32 norm n/a R/W Variable float
RR 400-576 -1E+08 1E+08 D 32 rev. n/a R/W Variable real
RR 700-776 -1E+08 1E+08 D 32 rev. n/a R/W Variable real
Words
R(2) 400-576 -32768 32767 S (1) 16 n/a ww (3) R/W Variable (BYTE)
R(2) 600-677 0 9999 S (1) 16 n/a ww (3) R/W Counter Acc,Timer Acc
R(2) 700-776 -32768 32767 S (1) 16 n/a ww (3) R/W Variable Byte
Bits
IO 0-157 0 1 n/a 1 n/a ww (3) R/W Input/Output (Bit)
IO 700-767 0 1 n/a 1 n/a ww (3) R/W Input/Output (Bit)
C 160-377 0 1 n/a 1 n/a ww (3) R/W Variable (Bit)
C 770-1077 0 1 n/a 1 n/a ww (3) R/W Variable (Bit)
SR 500-577 0 1 n/a 1 n/a ww (3) R/W Shift Register Bit
CT 600-677 0 1 n/a 16 n/a n R Counter Status
T 600-677 0 1 n/a 16 n/a n R Timer Status
Note: To specify bits for R, use the form Raaa.bb , where aaa means the word address and bb means
the bit specification from 00-15. Writing to bits cause a word write.
Note 1:R location can be interpreted as Signed Integer, Unsigned Integer or BCD. The normal
interpretation of a R location is Signed Integer.
Note 2: The format qualifier changes the way this variable is read.
C Read or Write as BCD -9999 - 9999
I Read or Write as Signed Integer -32767 to 32768
U Read or Write as an Unsigned Integer 0 to 65535
Note 3: Writing to a bit cause a word write.
Address Format = Octal
The bit delimiter for R words is ( . ). The bit range is 0-15. The bit format is D (decimal). Other
variable types do NOT use bit delimiter.
The bit format for IO, C, and SR types is D (decimal)
The node ID delimiter for all types is ( _ ) . This is an underscore symbol. The Minimum Node ID is 1,
the Max Node ID is 90. The Node ID format is D (decimal).