44
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Chapter 2
Install the Dynamix 1444 Series Monitoring System
3. The terminal base is in the center position to the DIN rail. Once
hooked, fasten the two center (set) screws to secure the base to the rail.
4. Tighten the two bottom set screws to secure the terminal base to the
base plate to help prevent a rocking effect while applying mechanical
pressure to the base.
Reverse the process to remove a base. Loosen the screws to create sufficient
clearance for removal of the terminal base.
Establish Bus Connections
Before you configure the terminal base and install the main module, establish
the Expansion bus connections between modules. The Expansion bus provides
power and communication from a DYN module to associated expansion
modules positioned to the right and distributes the tacho bus to up to six main
modules. These modules include the TSCX modules host, and mounted to the
left or right of the TSCX module.
Based on system design, the required module-to-module connections can be
made with interconnect cables (refer to the Local Bus module to module,
interconnect cables) section in
Local Bus Connection (Main/Expansion) on
). These ribbon cable assemblies can then be fitted between various
module types.
M