72
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Chapter 2
Install the Dynamix 1444 Series Monitoring System
A list of appropriate terminals for each channel follows.
Temperature Transmitter
Configure the channel for a +24V supply. A load resistor is required at the
input terminals to provide the necessary current/voltage conversion. In
addition to resistance value and precision (functional requirements), consider
resistor power rating as it pertains to heating and maximum surface
temperature under normal and fault conditions.
A list of appropriate terminals for each channel follows.
Complete the configuration as follows:
• Configure the sensitivity as: Load R * 16/TX Range (millivolt/
degree)
(1)
• Set an appropriate offset so 4 mA = 0°
Typical Core Designation
Channel 0
Channel 1
Channel 2
Channel 3
Acceleration SIG (+)
3
7
-
-
Return (-)
4
8
-
-
Then link these terminals:
1 and 2
5 and 6
-
-
Temperature SIG (+)
-
-
11
15
Typical Core Designation
Channel 0
Channel 1
Channel 2
Channel 3
Power
1
5
9
13
Return (-)
2
6
10
14
Fit Load Resistor
3 and 4
7 and 8
11 and 12
15 and 16
(1) For slightly higher accuracy, include the effect of the channel input resistance.