14
#C
+21.50
+0.00
CCM
MENU/
TOTAL
SETPT
0.000
SCCM
Air
PSIA
+13.60
+0.00
SCCM
Main
+0.00
SETPT
0123.4
MENU/
MAIN
SCCM
+123.4
TOTAL/
TIMER
REMAIN
RESET
2:05 h:m:s
00123.45
Scm3
The
Main
display shows pressure,
temperature, set-point, volumetric flow
and mass flow.
Pressing the button adjacent to a
parameter will make that parameter
the primary display unit.
By hitting the
MENU
button at the
bottom right of the screen you will
enter the
Select Menu
display.
If your controller was ordered with the
Totalizer
option (page 54), pushing the
TOTAL
button once will bring up the
Totalizing Mode
display. Pushing
MENU
will bring up the
Select Menu
display.
DISPLAYS AND MENUS
The device screen defaults to
Main
display as soon as power is applied to the controller.
Note: See page 28 to rotate the display 180°.
Select Menu
From
Select Menu
you can change
the selected gas, interact with your
RS-232 / RS-485 settings, read
manufacturer’s data or access the
control set-up display.
Push
MAIN
to return to the Main display.
Totalizer
(option only)
C ONTROL
SETUP
RS232
COMM
MFG
DATA
MAIN
MISC
GAS
SELECT
Select Menu
