Alicat Scientific MC Series Installation & Maintenance Instructions Manual Download

Page: 23 / 103

GAS SELECT

Gas Select

allows you to set your

device to up to 150 standard gases and

mixes. You can also use

COMPOSER

program and store up to 20 additional

gas mixes.

Gas Select

is accessed by pressing the

button below

GAS SELECT

on the Select

Menu display.
To select a gas, use the UP and DOWN

buttons to position the arrow in front of

the desired gas category.

Recent: Eight most recent selections

Standard: Gases and mixes standard

on earlier Alicat instruments (page 40)

Factory Custom: Present only if customer

requested gases were added at the factory

COMPOSER User Mixes: Gas mixes

programmed by the user (page 23)

Bioreactor (page 44)

Breathing (page 45)

Chromatography (page 47)

Fuel (page 46)

Laser (page 46)

O2 Concentrator (page 47)

Pure Corrosive* (page 41)

Pure Non-Corrosive (page 40)

Refrigerant* (page 42)

Stack (page 47)

Welding (page 43)

Press PAGE to view a new page in the gas category list.
Press SELECT to view the gases in the selected category. Align the arrow with the

desired gas. Press SET to record your selection and return to the MAIN display.

The selected gas will be displayed on the screen.

Pure Corrosive and Refrigerant gases are only available on

S-Series

instruments

that are compatible with these gases.

Note:

Gas Select may not be available on units ordered with a custom gas or blend.

See pages 41 -48 for a full list of gases in each category.

DOWN

CANCEL

SET

PAGE

>Recent

Standard

Factory Custom

COMPOSER User Mixes

Bioreactor

Breathing

Chromatography
Fuel

DOWN

CANCEL

SET

PAGE

> Fuel

Laser

O2 Concentrator

Pure Corrosive

Pure Non-Corrosive

Refrigerant

Stack

Welding

Summary of Contents for MC Series








































































































Search results

Summary of Contents for MC Series

Reviews:

Related manuals for MC Series

Brands by name

Popular brands

Alicat Scientific MC Series, Installation & Maintenance Instructions Manual

Search results

Summary of Contents for MC Series

Reviews:

Related manuals for MC Series

Brands by name

Popular brands