Alfa Network AWAP05O, User Manual

Page: 64 / 226

System Configuration
6-14
6
address filter delete command. To display the current settings, use the show
authentication command from the Exec mode.
CLI Commands for RADIUS MAC Authentication – Use the mac-authentication
server command from the global configuration mode to enable remote MAC
authentication. Set the timeout value for re-authentication using the
mac-authentication session-timeout command. Be sure to also configure
connection settings for the RADIUS server (not shown in the following example). To
DUAL OUTDOOR(config)#mac-authentication server local 7-39
DUAL OUTDOOR(config)#address filter default denied 7-37
DUAL OUTDOOR(config)#address filter entry 00-70-50-cc-99-1a
denied
7-38
DUAL OUTDOOR(config)#address filter entry 00-70-50-cc-99-1b allowed
DUAL OUTDOOR(config)#address filter entry 00-70-50-cc-99-1c allowed
DUAL OUTDOOR(config)#address filter delete 00-70-50-cc-99-1c
7-38
DUAL OUTDOOR(config)#exit
DUAL OUTDOOR#show authentication
7-40
Authentication Information
=========================================================
MAC Authentication Server : LOCAL
MAC Auth Session Timeout Value : 300 secs
802.1x : DISABLED
Broadcast Key Refresh Rate : 5 min
Session Key Refresh Rate : 5 min
802.1x Session Timeout Value : 300 secs
Address Filtering : DENIED
System Default : DENY addresses not found in filter table.
Filter Table
MAC Address Status
----------------- ----------
00-70-50-cc-99-1a DENIED
00-70-50-cc-99-1b ALLOWED
=========================================================
DUAL OUTDOOR#