Alfa Network AWAP05O, User Manual

Page: 141 / 226

Flash/File Commands
7-27
7
Example
Related Commands
snmp-server contact (7-24)
show snmp
This command displays the SNMP configuration settings.
Command Mode
Exec
Example
Flash/File Commands
These commands are used to manage the system code or configuration files.
bootfile
This command specifies the image used to start up the system.
Syntax
bootfile < filename >
filename - Name of the image file.
Outdoor Bridge(config)#snmp-server location building-1
Outdoor Bridge(config)#
Outdoor Bridge#show snmp
SNMP Information
============================================
Service State : Enable
Community (ro) : *****
Community (rw) : *****
Location : WC-19
Contact : Paul
Traps : Enabled
Host Name/IP : 10.1.19.23
Trap Community : *****
=============================================
Outdoor Bridge#
Command Function Mode Page
bootfile Specifies the file or image used to start up the system Exec 7-27
copy Copies a code image or configuration between flash memory
and a FTP/TFTP server
Exec
7-29
delete Deletes a file or code image Exec 7-30
dir Displays a list of files in flash memory Exec
7-30