Alfa Network AWAP05O, User Manual

Page: 104 / 226

System Configuration
6-54
6
Note:
The index and length values used in the key command must be the same
values used in the encryption and transmit-key commands.
CLI Commands for WEP over 802.1x Security – From the 802.11a or 802.11g
interface configuration mode, use the
authentication command to select open
system authentication. Use the multicast-cipher command to select WEP cipher
type. Then set 802.1x to required with 802.1x command, and disable MAC
authentication with the mac-authentication command. To view the current 802.11g
security settings, use the show interface wireless g command (not shown in
example).
----------------Security-----------------------------------
Closed System : DISABLED
Multicast cipher : WEP
Unicast cipher : TKIP
WPA clients : SUPPORTED
WPA Key Mgmt Mode : DYNAMIC
WPA PSK Key Type : HEX
Encryption : 128-BIT ENCRYPTION
Default Transmit Key : 1
Static Keys :
Key 1: ***** Key 2: EMPTY Key 3: EMPTY Key 4: EMPTY
Authentication Type : SHARED
===========================================================
DUAL OUTDOOR#
DUAL OUTDOOR(config)#interface wireless g 7-66
Enter Wireless configuration commands, one per line.
DUAL OUTDOOR(if-wireless g)#authentication open
7-73
DUAL OUTDOOR(if-wireless g)#encryption 128 7-74
DUAL OUTDOOR(if-wireless g)#multicast-cipher wep 7-76
DUAL OUTDOOR(if-wireless g)#end
DUAL OUTDOOR(config)#802.1x required
7-35
DUAL OUTDOOR(config)#no mac-authentication 7-39
DUAL OUTDOOR(config)#