Alfa Network AWAP05O, User Manual

Page: 77 / 226

Advanced Configuration
6-27
6
command to set the facility-type number to use on the Syslog server. To view the
current logging settings, use the
show logging
command.
Configuring SNTP
Simple Network Time Protocol (SNTP) allows the wireless bridge to set its internal
clock based on periodic updates from a time server (SNTP or NTP). Maintaining an
accurate time on the wireless bridge enables the system log to record meaningful
dates and times for event entries. If the clock is not set, the wireless bridge will only
record the time from the factory default set at the last bootup.
The wireless bridge acts as an SNTP client, periodically sending time
synchronization requests to specific time servers. You can configure up to two time
server IP addresses. The wireless bridge will attempt to poll each server in the
configured sequence.
SNTP Server – Configures the wireless bridge to operate as an SNTP client. When
enabled, at least one time server IP address must be specified.
• Primary Server: The IP address of an SNTP or NTP time server that the wireless
bridge attempts to poll for a time update.
• Secondary Server: The IP address of a secondary SNTP or NTP time server. The
wireless bridge first attempts to update the time from the primary server; if this fails
it attempts an update from the secondary server.
Note:
The wireless bridge also allows you to disable SNTP and set the system
clock manually using the CLI.
Set Time Zone – SNTP uses Coordinated Universal Time (or UTC, formerly
Greenwich Mean Time, or GMT) based on the time at the Earth’s prime meridian,
zero degrees longitude. To display a time corresponding to your local time, you must
DUAL OUTDOOR(config)#logging on 7-15
DUAL OUTDOOR(config)#logging level alert 7-17
DUAL OUTDOOR(config)#logging console 7-16
DUAL OUTDOOR(config)#logging host 1 10.1.0.3 514 7-16
DUAL OUTDOOR(config)#logging facility-type 19 7-17
DUAL OUTDOOR(config)#exit
DUAL OUTDOOR#show logging
7-18
Logging Information
============================================
Syslog State : Enabled
Logging Host State : Enabled
Logging Console State : Enabled
Server Domain name/IP : 1 10.1.0.3
Logging Level : Error
Logging Facility Type : 16
=============================================
DUAL OUTDOOR#