Command Line Interface
7-58
7
pppoe remote ip
This command sets the remote IP address for the PPPoE tunnel.
Syntax
pppoe remote ip
<
ip-address>
ip-address
- IP address of the remote end of the PPPoE tunnel.
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
If the
pppoe ip allocation mode
is set to static, the remote IP address must
be entered with this command, and the local IP address must be entered with
the
pppoe local ip
command.
Example
Related Commands
pppoe ip allocation mode (7-54)
pppoe local ip (7-57)
pppoe username
This command sets the user name for the PPPoE tunnel.
Syntax
pppoe username
<
username>
username
- User name assigned by the service provider.
(Range: 1-63 alphanumeric characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
You must enter a user name with this command, and a password with the
pppoe password
command.
Example
Outdoor Bridge#(if-ethernet)#pppoe remote ip 192.168.1.20
Outdoor Bridge#
Outdoor Bridge#(if-ethernet)#pppoe username mike
Outdoor Bridge#
Summary of Contents for AWAP05O
