41
4.5.8.3.
«Pause conference» (C.9.)
The running of the conference can be stopped with button
«Pause conference» (C.9.),
and then with the repeated pressing of this button
«Continue conference» (C.9.)
it is possible
to continue it.
When starting the conference the list of
«Expectants» (C.16.), «Speakers» (C.15.)
and
«Former Speakers» (C.17.)
will be empty. When pause is switched on the tables
«Expectants» (C.16.)
and
«Speakers» (B.15.)
are emptied, which means that requesting the
floor is cancelled and the switched on microphones are switched off.
4.5.8.4.
«Start priority»
(C.10.)
This priority may be initiated from the president unit by pressing the button
«Start
priority»
(C.10.)
. A presidential prohibition results in the switching off of the microphones of
those units that have priority level 0, and it will not be possible to switch on the units of this
type till the end of the prohibition. Units of higher priority level (level 1) are not influenced
by the presidential prohibition. For terminating the presidential prohibition, button
«End
priority» (C.10.)
has to be pressed again, and the delegate microphones may be switched on
again, however, the units switched off by the presidential prohibition are not switched on
again automatically.
Symbol « » displayed before the name of the participant, who has been switched off
by a presidential prohibition indicates the inactive status of the microphone.
During the presidential prohibition the background colour of buttons
(C.10.)
and
(C.11.)
changes to red for attention raising purposes.
4.5.8.5.
«Revocation of priority» (C.11.)
In the status of presidential prohibition it is possible to terminate the presidential
prohibition by pressing the button
«Revocation of priority» (C.11.)
in such a way that the
previously active microphones are automatically switched on simultaneously.
4.5.8.6.
«Speaker mode» (C.12.)
From the roll-down menu is possible to select the method of giving-the-word, and this
may be
«Manual»
,
«Automatic 1» and
«Automatic 2».
o
«Manual» operation mode
In this operation mode in case of a speech is initiated by a participant without priority,
then the participant will not get the word immediately, only his/her name will be introduced
into table
«Expectants»
(C.16.)
. At the same time symbol «
» is displayed in front of the
given participant both in table
«Participants» (C.14.)
and table
«Expectants» (C.16.)
, this
symbol indicates the "expectant" status. The word can be given to the participant only by the
technician, who operates the conference. First the name of the word requesting participant has
to be selected from one of the tables, then button
«Add to speakers’ list» (C.13.)
has to be
clicked. Simultaneously with this the name of the participant is moved from table
«Expectants» (C.16.)
to table
«Speakers» (C.15.)
and table
« Former Speakers » (C.17.)
, and
at the same time symbol «
» appears in front of his/her name, which indicates the active
status of the microphone.
Summary of Contents for CS5 CONFERCONTROL
Page 54: ...54 ...
