50
5.
INSTALLING THE SYSTEM
5.1.
G
ENERAL INTRODUCTION
Present user manual contains only information related to the installation and operation
of the
CS5 ConferControl
computer based controlling program.
For this reason before installing and using the program by all means the User Manual of
conference system
CS5
has to be read and only after understanding its contents it is possible
to start using
CS5 ConferControl
.
Attention! In the switched on status of the system no cabling of any kind may be
executed. Cable removal and connection under voltage may cause the failure of both the
complete system and the failure of the individual devices.
5.2.
S
TRUCTURE OF THE SYSTEM
For the computer based controlling of conference system
CS5
a Personal Computer
equipped with operation system Microsoft© Windows© XP or Windows© Vista and a
CS5
ConferControl
controlling program is needed
Conference controller PC can be connected only to a CS5 conference system that is
complemented with a basic unit. Controlling the system may take place through the
«SERIAL» or «USB» ports of the computer, which ports are to be connected to the same type
of ports of the BU with the aid of the appropriate cables. Using the «USB» port is
recommended primarily for controlling the system.
The «USB» cable that is needed for connecting PC and BU is an accessory of CS5
system.
In the interest of fully exploiting the functional options ensured by computer based
controlling it is recommended that primarily delegate units and voting units to be used.
Summary of Contents for CS5 CONFERCONTROL
Page 54: ...54 ...
