AKG CS5 CONFERCONTROL, Manual

Page: 13 / 54

13
•
«Settings» (D.)
Here is possible to set the essential parameters of the conference system.
•
Exit (F.1.)
Here is possible to exit the conference controlling program. Before exiting, the program
asks for confirmation, then closes everything properly and finally stops the running of the
program.
•
«Choose language» (F.2.)
It is possible to select here the language of the controlling program. Three different
languages (English, Russian and Hungarian) are factory defaults. It is also possible to
install arbitrary additional languages. The procedure of installing new languages is
introduced in detail in Section 4.4.11.
«Language Editor» (D.11.) .
•
«Refresh» (F.3.)
When pressing this button the program checks and lists those ports to which a
controllable CS5 conference system is connected.
•
«Units» (F.4.)
This label shows the number of the connected units.
•
«Free channels» (F.5.)
This function shows the number of channels that are authorized to forward speeches and
which are currently still free. This number depends on the maximum number of
microphones that may be switched on simultaneously (NOM LIMIT). This parameter
may be set on the central unit of the conference system (Basic Unit - BU).
•
Conference status (F.6.)
Displays the current status of the conference, it may display the following texts:
«EMPTY» – if there is no conference uploaded, «LOADED», «RUNNING»,
«STOPPED», «PAUSED» .
•
Time of Conference (F.7.)
Shows the time passed since the start of the conference.
•
System status (F.8.)
Displays whether the conference system is connected to the controlling computer. Thus
depending on the status either the text
«CONNECTED» or «DISCONNECTED» is
displayed.