39
4.5.7.
A
LLOCATING THE UNITS
(C.8.)
With the aid of this field is possible to select from the roll-down list a delegate unit for
the participant selected in table
«Participants» (C.6.)
from the list containing the internal
addresses of the units that are available (which may be selected).
In the case of chip card identification it is not possible to select a unit here, for this
reason this field is inactive. In this case the unit belonging to the given person can be
modified only by inserting the card into an other unit.
In the field located above
(C.8.),
the internal address of the unit allocated to the given
person can be seen. Next to it in brackets the priority level set within the given unit (on
hardware level) is displayed, which can be 0 or 1.
In case of the president unit, next to the priority level indicated in brackets the text
«president»
is also displayed.
In the roll-down list containing the internal addresses of the units
(C.8.)
address 0 is
always included, this address is given to those participants, who are included in the list of
conference participants
(C.6.),
but did not attend the conference. The same way unit address 0
has to be given to those participants as well, who appeared at the conference, but who did not
get any delegate units (more participants than delegate units).
If one would like to modify an already existing allocation and each unit is distributed,
then first a 0 address has to be given to that participant, whose unit address (delegate unit) we
would like to transfer to an other participant. The released address can be allocated to an other
participant only after this.
Allocating the units to participants or modifying their allocation can be done when the
conference is loaded and even during the conference at any time. It is also possible to insert
and remove the chip card before the conference and also during the conference, in this case
the changes are immediately displayed in the
«Participants» (C.6.)
table.
In the box included in the field located below
(C.8.)
, is displayed whether the
participant selected in table
(C.6.)
has a speaking and voting right or not. This field is
inactive, since the right of the participant cannot be modified. It may be modified only
according to Section 4.3.10.
«Assign participants» (B.10.)
with the aid of button
«Allowed to
speak and vote» (B.10.6.)
.
Summary of Contents for CS5 CONFERCONTROL
Page 54: ...54 ...
