52
5.3.3.
I
MPORTANT TO KNOW
•
While the controlling program is running it is forbidden to disconnect or modify any of
the cable connections.
•
In the interest of higher reliability using an uninterrupted power supply (UPS) is
recommended, this way the data of a currently running conference are not lost even in the
case of voltage fluctuations or power dropout, and the conference started can be properly
closed.
•
In case disconnecting the cables is nevertheless needed, then it may be done only after
proper switching off as described in Point 5.3.2..
•
In case of hardware modification (e.g. changing the internal address or priority of a unit)
the conference controlling program has to be closed and it has to be exited as described in
the previous section, but as a minimum breaking the connection to the conference system
is essential with the aid of press button
«Connect/Disconnect» (D.7.),
see in section 4.4.7.
•
Before each hardware modification the given conference has to be closed by all means,
then after completing the changes for the purpose of continuing the conference a copy has
to be made, since a closed conference already cannot be continued.
The manufacturer does not undertake any kind of liability for damages that are
caused by improper use and from the non observance of the contents of the User manual!
Summary of Contents for CS5 CONFERCONTROL
Page 54: ...54 ...
