FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1 77 www.aja.com
COLOR Menu Group
IMPORTANT: In Four Channel Mode, the settings in this menu group apply only to the
selected Video Processor (VID1- VID 4).
1.0 Proc Amp Enable (YUV)
This parameter turns the Proc Amp On and Off for signals composed of YUV
components. When it is On, you can set additional parameters to control video
Gain, Black Level, Hue, and Saturation.
Off
(default)
On
Sets the YUV Proc Amp to Off.
Sets the YUV Proc Amp to On.
Source Memory
Independent Proc Amp parameter values are kept for each input format.
1.1 Proc Amp Gain
This parameter adjusts the video gain from 0 to 1.5 times luma in 0.01 steps
Variable
Adjusts Proc Amp Gain from zero to 1.5 in 0.01 steps.
Default (unity):
1.0
1.2 Proc Amp Black
This parameter adjusts the video black level from -20 IRE to +20 IRE in 0.5 steps.
Variable
Adjusts Proc Amp Black level from -20 IRE to +20 IRE in 0.5 steps.
Default (unity):
0 IRE
1.3 Proc Amp Hue
This parameter adjusts the video color hue through 360 degrees (color wheel) in
1 degree steps.
Variable
Adjusts Proc Amp Hue from -179 to +180 in steps of 1 degree.
Default (unity):
0 degrees
1.4 Proc Amp Sat
This parameter adjusts the video color saturation from black and white to 1.5
times chroma in steps of 0.01.
Variable
Adjusts Proc Amp Saturation from 0 (black & white) to 1.5 (Chroma)
in steps of 0.01.
Default:
1.0
3.0 Video Legalizer
These parameters allow adjustment of signal levels to meet legal broadcast
requirements. When set to Off, the Video Legalizer is not enabled, and the
following clip controls are not active. In YUV mode, the White Clip, Black Clip,
