FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1 18 www.aja.com
Processor has been selected, the nine VIDEO Menu Group buttons on the right
are activated. The VIDEO Menu Group button that was last selected for that Video
Processor will be illuminated, and the alphanumeric display will show the last
selected parameter menu for that Video Menu Group.
Similarly, the EMBED and AES Channel Select buttons selects either Embedded
or AES audio, and activates the three AUDIO Menu Group buttons to the far
right. The last selected AUDIO Menu Group button for that audio type will be
illuminated and its last selected parameter menu will be displayed. Pressing an
Audio Channel Select button de-selects the Video Channel Select button, and
vice-versa.
This design allows rapid menu access, reducing the number of menus to scroll
through, and time is saved when button presses automatically return to their last
selected menus.
Operational Summary
To change FS-HDR operational parameters with the front panel controls:
1. Select a system component and menu group for the alphanumeric display:
• For overall system control, press one of the six SYSTEM buttons,
• For control of a Video Processor, press one of the four VID1-4 Channel Select
buttons and then press one of the VIDEO Menu Select buttons,
• For Embedded audio control, press the EMBED button and then press one
of the AUDIO Menu Select Buttons,
• For AES or MADI audio control, press the AES button and then press one of
the AUDIO Menu Select Buttons.
2. Scroll through menus in a group: Turn SELECT.
3. Edit a menu parameter: Stop SELECT on the menu, then turn ADJUST to set
the value. Changes are applied immediately.
Multiple Part Parameter Editing
To edit a multiple part parameter, such as an IP address,:
1. Push the ADJUST knob momentarily (the value blinks).
2. To save the whole parameter after editing, push ADJUST momentarily again.
Coarse Adjust Editing
To coarse adjust a value (for use with parameters that have more than 10
selections):
• 10x speed - Hold down the SYSTEM or currently active CHANNEL SELECT
button (the button turns dark blue) and turn ADJUST. The values will change
in approximately 10x increments.
• 100x speed (available for extremely wide-range parameters, like Audio Delay)
- After enabling 10x speed above, momentarily release and press that group
button a second time (the button turns light blue). Turning ADJUST will now
change the value in approximately 100x increments.
Undo a Change
To restore a previous setting:
• Push SELECT momentarily.
