FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1 90 www.aja.com
Output Frame Rate
Horizontal
Vertical
Min
Max
Min
Max
720p25
0
3959
-375
375
720p29.97, 720p30
0
3299
-375
375
720p50
0
1979
-375
375
720p59.94, 720p60
0
1649
-375
375
3 Frame Delay
This parameter adjusts Video Processor output timing.
Variable
Adjustment output timing from 0 to 6 frames in one frame
increments.
Default: 0
NOTE: This delay amount is in addition to the FS-HDR’s default video latency. In Four
Channel Mode and in Single Channel Mode with no Ultra-HD/4K up or down
conversion, this default latency is nominally two frames at low frame rates
(23.98/24/25/29.97/30 fps) or four frames at high frame rates (50/59.94/60 fps). In
Single Channel Mode with UltraHD/4K up or down conversion being performed
this default latency is nominally 3 frames at low frame rates or five frames at high
frame rates.
TSTGEN Menu Group
IMPORTANT: In Four Channel Mode, the settings in this menu group apply only to the
selected Video Processor (VID1- VID 4).
1 Test Pattern Gen
This parameter turns selects whether test pattern is output by that Video
Processor.
Off (default)
On
Normal video is output (no test pattern).
The output is the test pattern generator.
NOTE: Normal output can be a version of its currently selected input, a Sidebar or
Letterbox display, Black, or a Freeze of last good video, depending on the current
configuration.
2 Test Pattern
This parameter selects the type of test pattern output if Test Pattern Gen is on.
75% Bars (default)
Flat
Black
100% Bars
Sets the test pattern to 75% color bars.
Sets the test pattern to flat field gray.
Sets the test pattern to black.
Sets the test pattern to 100% color bars.
FREEZE Menu Group
IMPORTANT: In Four Channel Mode, the settings in this menu group apply only to the
selected Video Processor (VID1- VID 4).
