FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1 24 www.aja.com
Example Reference and Video Incompatibility Alarms
Video incompatibilities that the FS-HDR may detect include the following
examples:
Table 1. Video Incompatibility Examples
Video Incompatibility Detected
Alarm Status screen will show
Video Status screen will show
Genlock Source is set to “Reference”,
but no Reference signal is detected.
In this example the cable has been
disconnected.
IN
SDI 1
OK
BKGD Matte
OK
GEN
Ref
No Ref
OUT1
1080i59
IN
SDI 1
1080i59
BKGD Matte
GEN
Ref
No Input
OUT1
UHDp59
Reference signal format is not
compatible with selected Output
Format. In this example the
reference signal is 50 Hz but output
is 59.94 Hz.
IN
SDI 1
OK
BKGD Matte
OK
GEN Ref
incompat
OUT
1080i59
IN
SDI 1
1080i59
BKGD Matte
GEN Ref
1080i50
OUT1
UHDp59
Figure 5. Web page example of un-supported signals alarm.
Rear Panel Description
SDI 1-4
Output BNCs
10/100/1000
RJ45 Ethernet
LAN Connector
GPI 25-pin
DB-25F
Connector
ID
LED
External Reference
I/O with looping
BNC connectors.
AC Power
Socket #2
Autosensing
100 to 240VAC
50/60Hz
AC Power
Socket #1
Autosensing
100 to 240VAC
50/60Hz
SFP Input
SDI 6,5,8,7
SDI 1-4
Input BNCs
Monitor
Output HDMI
Monitor
Output BNC
MADI BNC
Out/In
MADI Fiber
Out/In
SFP Output
SDI 5, 6, 7, 8
AES/EBU Digital
Audio In
Channels 1-16
DB-25F Connector
AES/EBU Digital
Audio Out
Channels 1-16
DB-25F Connector
Connectors
The FS-HDR rear panel connectors are summarized below:
