AirLive A.DUO User Manual Download Page 25

Page: 25 / 191

3. Configuring the A.DUO

AirLive A.DUO User’s Manual

Configuring the

A.DUO

The A.DUO offers many different types of management interface. You can configure

through standard web browser (http), secured web (https), command line (telnet), secured

command shell (SSH, SSH2), and SNMP management. In this chapter, we will explain

A.DUO’s available management interfaces and how to get into them. Then, we will provide

the introduction on Web Management and recommended initial settings.

3.1 Important Information

The following information will help you to get start quickly. However, we recommend you to

read through the entire manual before you start. Please note the password and SSID are

case sensitive.

The default IP address is:

192.168.1.1

Subnet Mask:

255.255.255.0

When using Web UI, the login as follow:

User name:

admin

Password:

airlive

When using telnet, the password is:

airlive

When using SSH/SSH2, the login as follow:

root

Password:

airlive

The default radio mode for Radio 1 is

802.11a

The default radio mode for Radio 2 is

802.11g/b

The default SSID for Radio 1 is:

AirLive1

The default SSID for Radio 2 is:

AirLive 2

The default wireless mode is :

Dual Band Router Mode

After power on, please wait for 2 minutes for A.DUO to finish boot up

Please remember to click on “Apply” for new settings to take effect

Please remember to enter the correct “Distance” parameter in wireless settings.

Failure to do so can result in poor performance.

The default country code is :

United Kingdom

If you are living outside of EU, please go to Operation Mode->Setup->Regulatory
Domain to change country.

Summary of Contents for A.DUO
































































































































































































Search results

Summary of Contents for A.DUO

Reviews:

Related manuals for A.DUO

Brands by name

Popular brands

AirLive A.DUO, User Manual

Search results

Summary of Contents for A.DUO

Reviews:

Related manuals for A.DUO

Brands by name

Popular brands