AirLive A.DUO User Manual Download Page 24

Page: 24 / 191

2. Installing the A.DUO

AirLive A.DUO User’s Manual

6. Please enter your ISP’s authentication Information and Click on “Apply” button. Here

are some guidelines.

If your Internet connection is ADSL, it is most likely using the following option:

your ISP already provides you with PPPoE authentication information,
select this button and enter the information below:

If your internet connection is Cable Modem, it is most likely to use the option:

your ISP already provides you with a Host Name, select this button and

enter the information below: (DHCP)

However, please still consult with your ISP about the correct account information..

7. Click on “Apply” to finish.

Summary of Contents for A.DUO
































































































































































































Search results

Summary of Contents for A.DUO

Reviews:

Related manuals for A.DUO

Brands by name

Popular brands

AirLive A.DUO, User Manual

Search results

Summary of Contents for A.DUO

Reviews:

Related manuals for A.DUO

Brands by name

Popular brands