AirLive A.DUO, User Manual

Page: 186 / 191

10. Wireless Network Glossary
179 AirLive A.DUO User’s Manual
ample,
-60dB is considered as a good connection.
RTS
TS (Request to Send). The RTS/CTS(clear to send) packet will be send before a frame if
e is larger than this value. Lower this value can improve the performance if
our network. You can try 1500, 1000 or 500 when there are many
imple Network Management Protocol. A set of protocols for managing complex networks.
elements: managed devices, agents, and
etwork-management systems (NMSs). Managed devices are network devices that content
nts are programs that reside SNMP capable device's firmware to
provide SNMP configuration service. The NMS typically is a PC based software such as HP
RSSI
Receiver Sensitivity Index. RSSI is a value to show the Receiver Sensitivity of the remote
wireless device. In general, remote APs with stronger signal will display higher RSSI values.
For RSSI value, the smaller the absolute value is, the stronger the signal. For ex
“-50db” has stronger signal than “-80dB”. For outdoor connection, signal stronger than
Request To Send. A packet sent when a computer has data to transmit. The computer will
wait for a CTS (Clear To Send) message before sending data.
RTS Threshold
R
the packet fram
there are many clients in y
clients in your AP’s network.
SNMP
S
The SNMP network contains 3 key
n
SNMP agents. SNMP age
Openview that can view and manage SNMP network device remotely.