AirLive A.DUO User Manual Download Page 174

Page: 174 / 191

10. Wireless Network Glossary

167

AirLive A.DUO User’s Manual

vise

02.11d

own as “Global Roaming”. 802.11d is a standard for use in countries where systems

using other standards in the 802.11 family are not allowed to operate.

applications.

he WMM is based on a subset of the 802.11e.

e WiFi devices in 5GHz for EU.

802.11b

International standard for wireless networking that operates in the 2.4 GHz frequency band

(2.4 GHz to 2.4835 GHz) and provides a throughput up to 11 Mbps

802.1d STP

Spanning Tree Protocol. It is an algorithm to prevent network from forming. The STP

protocol allows net work to provide a redundant link in the event of a link failure. It is ad

to turn on this option for multi-link bridge network.

Also kn

802.11e

The IEEE QoS standard for prioritizing traffic of the VoIP and multimedia

802.11g

A standard provides a throughput up to 54 Mbps using OFDM technology. It also operates

in the 2.4 GHz frequency band as 802.11b. 802.11g devices are backward compatible wi

802.11b devices.

802.11h

This IEEE standard define the TPC (transmission power control) and DFS(dynamic

frequency selection) required to operat

Summary of Contents for A.DUO
































































































































































































Search results

Summary of Contents for A.DUO

Reviews:

Related manuals for A.DUO

Brands by name

Popular brands

AirLive A.DUO, User Manual

Search results

Summary of Contents for A.DUO

Reviews:

Related manuals for A.DUO

Brands by name

Popular brands