manualshive.com logo in svg

Agrowtek GrowControl GCX, Instruction Manual, Page: 9 / 78

Share
Download
Agrowtek GrowControl GCX Instruction Manual Download Page 9

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

9

1. User Name  

Enter your user name by pressing on the text field to bring up the keyboard.

2. Password  

Enter your password by pressing on the text field to bring up the keyboard.

3. Login Button 

Once you have entered the correct user name and password, press LOGIN.

4. Keyboard  

The on-screen keyboard pops-up when ever a text field is selected.

Login Screen

User accounts with operator or administrator access can be configured on the system to restrict access to 

the system’s interface. If “Require Login on Power-up” is checked, the system will boot with the login screen. 

Swipe the slider at the bottom of the screen to the right to continue.

2

1

1. Logo Area

A custom logo can be displayed; see the “Files” page for more information.

2. Swipe Slider 

Slide the green dot from the left to the right then release.

If users are configured on the system, the login screen will appear:

2

1

3

4

Summary of Contents for GrowControl GCX















































































Reviews:

No comments