manualshive.com logo in svg

Agrowtek GrowControl GCX, Instruction Manual, Page: 52 / 78

Share
Download
Agrowtek GrowControl GCX Instruction Manual Download Page 52

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

52

Photostat

Photostat controls are used to operate equipment based on a light intensity set point and light sensor read-

ing. A setpoint determines the target light intensity and a “deadband” determines the allowed drift from the 

target before activating the photostat. When the light intensity returns to the target the photostat is de-

activated. 

Example uses:

• Activate fans with high sunlight for pre-emtpive cooling

• Alarms

1
2

5

3
4

1. Mode   High Light: 

Function activates when light intensity exceeds setpoint.

Low Light:  

Function activates when light intensity is below setpoint.

2. Sensor   Light sensor input to evaluate the set point against.

3. Setpoint  

The target sensor value to achieve.

4. Deadband  

The allowed drift from the target before activating the function.

5. Preview  

A preview of the function settings.

Summary of Contents for GrowControl GCX















































































Reviews:

No comments