manualshive.com logo in svg

Agrowtek GrowControl GCX, Instruction Manual, Page: 45 / 78

Share
Download
Agrowtek GrowControl GCX Instruction Manual Download Page 45

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

45

Every control function setting can be scheduled by time of day and/or start/end date.

To configure a setting to be active during a specific time range, enable the Time Range switch. 

Set a start and end time for the function to be enabled.

If a date range is to be specified, enable the Date Range switch.

Set a start and end date for the setting to be enabled.

1. Time Range  

Enable the switch to set a time range for the setting to be enabled.

2. Date Range  

Enable the switch to set a date range for the setting to be enabled.

3. First Day  

First date that the setting will be enabled (date range mode.)

4. Last Day  

Last date that the setting will be enabled (date range mode.)

5. Start Time  

Time of day that the setting will be enabled (time range mode.)

5. End Time  

Time of day that the setting will be disabled (time range mode.)

1
2

3

5

4

6

To enable a function setting dependent on another function’s status (instead of a physical output) select the 

“If Function” mode.

1. Press the [ IF FUNCTION ... ] button in the desired on or off mode.

The Enable Mode area will expand and the drop-down menus to select a function will be displayed.

2. Select a control group.

3. Select a function.

1

2

3

If Function True/False

Control Setting Schedule

Summary of Contents for GrowControl GCX















































































Reviews:

No comments