Agrowtek GrowControl GCX Instruction Manual Download Page 77

Page: 77 / 78

Input Power

12 - 24 Vdc, 2.5A Max

Included Power Supply

UL Listed Class II Limited Energy Power Supply

90-265VAC Input, 24Vdc 2.5A Max Output

Control Interface

GCX: 10.1” (1024 x 800) Capacitive Touch Screen

GCX+: 15.6” (1920 x 1080) Capacitive Touch Screen

GrowNET™ Ports / Devices

GCX: 8 / 100

GCX+: 16 / 200 (100 devices per 8-port bus)

Network Communication

10/100 Ethernet (RJ-45)

WiFi (optional, USB)

USB Ports

4x USB A 2.0 Host, 1x USB B Slave (boot loader)

Processor

Quad-Core 1.2GHz ARM

Linux

Operating System Memory

8GB, Industrial Flash

RAM

1GB (512MB shared GPU memory)

Enclosure

Powder Coated Aluminum

Working Environment

Maximum 70% RH non-condensing. Avoid direct sunlight.

Specifications

Technical Information

Storage

Store equipment in a clean, dry environment with ambient temperature between10-50°C.

Disposal

This indsutrial control equipment may contain traces of lead or other metals and environmental contami-

nants and must not be discarded as unsorted municipal waste, but must be collected separately for the

purpose of treatment, recovery and environmentally sound disposal. Wash hands after handling internal

components, tubing or PCB’s.

Storage and Disposal

Summary of Contents for GrowControl GCX















































































Search results

Summary of Contents for GrowControl GCX

Reviews:

Agrowtek GrowControl GCX, Instruction Manual, Page: 77 / 78

Search results

Summary of Contents for GrowControl GCX

Reviews: