manualshive.com logo in svg

Agrowtek GrowControl GCX, Instruction Manual, Page: 8 / 78

Share
Download
Agrowtek GrowControl GCX Instruction Manual Download Page 8

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

8

User Interface Introduction

The system is controlled by a 10.1” or 15.6” high resolution touch screen with easy to use graphical interface. 

The system uses familiar controls such as buttons, switches, check boxes, drop-down combo-boxes and text 

fields. Dynamic pop-up dialogs alert the user to faults or confirm important actions.

Swipe Gestures

Swipe Left/Right to change between tabs/pages.

Swipe Up/Down to scroll on pages.

Help Pages

Most pages include a help dialog that can provide reference information right at the screen.

Press the “?” button on the page header to display the help dialog.

1. Memory Status 

System memory status, should read OK.

2. Memory Capacity  Capacity and free space on the system memory.

3. Message Buffer 

Messages showing current actions of the loader.

4. Progress Bar 

Indicates the progress of the loader screen before starting the system.

5. Skip Button  

The loader screen can be skipped if this button is pressed.

   Button can not be pressed if firmware is found and loaded.

Loader Screen

The Agrowtek Leaf logo appears while the system boots. Once the Linux operating system boots, the system 

loader screen appears which displays the status of the system memory, and searches for downloaded firm-

ware updates, or for updates on USB memory. 

See Firmware Updates for more information.

2

3

4

5

1

Summary of Contents for GrowControl GCX















































































Reviews:

No comments