manualshive.com logo in svg

Agrowtek GrowControl GCX, Instruction Manual, Page: 22 / 78

Share
Download
Agrowtek GrowControl GCX Instruction Manual Download Page 22

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

22

Controls

Control “functions” are used to create control logic in order to operate equipment in a facility. Functions are 

arranged in work spaces known as “control groups.”  Control groups are often modeled after an environment 

zone, but they may also represent sub-zones or other logical groupings of controls.

Create and name control groups according to how you would like to group functions and show report dis-

plays. Note the system executes controls in the order of groups and functions within the groups. Groups and 

functions can be re-arranged to create the logical order required for proper operation. 

See the “Programming” section for more information.

 

TIP:

Press and hold on the control icon’s (3) name to drag the function to a different order in the workspace.

8

3

1

2

4

5

7

6

9

1. Workspace  

Controls work space; shows control functions in the selected group.

2. Function Toolbar  Toobar of available functions; press a button to add a new function to the workspace.

3. Function Icon 

Icon depicting the function type, status and name. 

Press the function icon to open the function editor and configure the function.

4. Run/Pause  

Set the control group to run mode or pause  (suspend).

5. Control Group 

Select the control group to view and edit in the workspace.

6. Rename Group 

Opens a dialog to rename the currently selected control group.

7. Add Group  

Opens a dialog to add a new control group to the system.

8. Move Group 

Opens a dialog to move the current group to a new position in the group list.

9. Remove Group 

Opens a dialog to delete the current group and all of it’s controls from the system.

Summary of Contents for GrowControl GCX















































































Reviews:

No comments