Agrowtek GrowControl GCX Instruction Manual Download Page 75

Page: 75 / 78

A USB flash drive is required for the USB update procedure. Contact the factory for firmware.

1. Copy the firmware file on to a USB flash drive.

2. Plug the USB flash drive into an available USB port.

3. Press the [ RESTART ] button on the system settings page.

USB Update

USB Troubleshooting

Some memory cards are not read properly by the GCX system. If the firmware file is not detected by the Sys-

tem Loader, then please try another USB flash drive or another format when formatting the flash drive.

Recommended Format: Fat16

USB File

USB memory will retain the update file so that it may be used on multiple machines without loss of the file.

Remove the USB memory after the update or the loader will update the firmware on each boot.

4. In the Restart dialog, press [ REBOOT SYSTEM ] and the system will reboot.

CAUTION

It is recommended to place equipment into Off mode prior to rebooting.

Once the system is rebooted, place equipment back into Auto mode.

Summary of Contents for GrowControl GCX















































































Search results

Summary of Contents for GrowControl GCX

Reviews:

Agrowtek GrowControl GCX, Instruction Manual, Page: 75 / 78

Search results

Summary of Contents for GrowControl GCX

Reviews: