manualshive.com logo in svg

Agrowtek GrowControl GCX, Instruction Manual, Page: 30 / 78

Share
Download
Agrowtek GrowControl GCX Instruction Manual Download Page 30

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

30

2. Confirm decomissioning of the device; press the [ DECOMISSION DEVICE ] button  in the dialog.

3. Press the [ - DEL ] button to remove the device selected in the device list.

4. Press the [DELETE DEVICE] button to confirm removal of the device or press [CANCEL] to leave the device 

on the system.

The device will be deleted from the device list and the data logs will be erased from the system memory.

Remove a Device

If a device is no longer in use on a system it can be deleted from the device list.

 NOTE: 

Removing a device that is in use by control functions will disable the control function.

If the device is still connected and communicating with the system it should be de-comissioned first to re-

move the address that is assigned to the device.

1. If the device is still connected, press the [ DE-COMISSION ] button.

Summary of Contents for GrowControl GCX















































































Reviews:

No comments