manualshive.com logo in svg

Agrowtek GrowControl GCX, Instruction Manual, Page: 24 / 78

Share
Download
Agrowtek GrowControl GCX Instruction Manual Download Page 24

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

24

Email Settings

An email account is required to send email or text message alerts from the system. Alerts can be sent to mul-

tiple email accounts or phone numbers.

Email alerts can be sent automatically for:

• System power-up

• User Login

• System Error / Alert

To configure email alerts, enter the email account settings to use for sending messages. Add at least one 

recipient and send a test message. Once a message is sent successfully and the settings are verified correct, 

general alerts can be enabled.

See “Email Configuration” section for more details and instructions on using Gmail.

1. Recipients  

Manage recipients of emails from the system.

2. Text Carrier  

If recipient is a mobile phone number, select the carrier of the phone service.

3. Recipeint List 

List of message recipients; select a recipient to highlight it.

4. Delete Recipient  Delete the highlighted recipient from the list.

5. Add Recipient 

Add the recipient listed in the Address field above.

6. Account Settings  Configuration for the email account used by the system to send messages.

7. Test Button  

Send a test message to recipients using the email account configured.

8. General Alerts 

Select the alerts to be sent by the system to the recipients.

1

8

6

2

4

5

3

7

Summary of Contents for GrowControl GCX















































































Reviews:

No comments