manualshive.com logo in svg

Agrowtek GrowControl GCX, Instruction Manual, Page: 54 / 78

Share
Download
Agrowtek GrowControl GCX Instruction Manual Download Page 54

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

54

Lights

The lights function can operate basic on/off discrete control and for dimmable control with PWM or 0-10V 

dimming. Dimming controls can be ramped up and down with a ramp-rate setting. Multiple dimming set-

tings can be layered to create a complex lighting profile. Lighting control includes features to dim lights 

based on a light intensity or if a high temperature condition exists.

To configure a lighting control, set the enable and schedule properties, then select a control mode (discrete 

or dimmable.) Configure the output assignments and if the light is dimmable, set the the target intensity 

and ramp rate.

It is possible to configre both a discrete output for controlling mains/circuit power and a dimmable output 

for controlling intensity.

1. Discrete Mode 

Enables discrete (on/off) output control.

2. Discrete Output 

Select a device and output on the device to operate.

3. Dimmable Mode  Enable the analog dimmable output control.

4. Analog Output 

Select a device and an analog output on the device to operate the dimming control.

5. Output Intensity  Target intensity for the dimmable output.

6. Ramp Rate  

Rate of change from current dimmable output intensity to new intensity.

1

2

3
4
5
6

Light Control Modes

Summary of Contents for GrowControl GCX















































































Reviews:

No comments