manualshive.com logo in svg

Agrowtek GrowControl GCX, Instruction Manual, Page: 42 / 78

Share
Download
Agrowtek GrowControl GCX Instruction Manual Download Page 42

© Agrowtek Inc.   |  www.agrowtek.com  |  Technology to Help You Grow™

42

Adding & Editing Controls

Controls functions are added to a workspace by pressing the desired toolbar button. An un-named function 

will be added to the workspace.

Press the new un-named function to open the editor dialog and configure the function.

3

2

1

Function Editor

When a function in a workspace is pressed, the function editor is opened. The function editor is where set-

tings are configured for the function including the scheduling, set-points, and device assignments.

The layout of the function editor is generally the same for all functions with the settings area having unique 

fields and options for each type of control function.

1. Header Bar  

General operations including function name, save, delete and exit.

2. Setting List  

List of settings in the control function. 

3. Settings Area 

Display for the currently selected settings for editing.

Summary of Contents for GrowControl GCX















































































Reviews:

No comments