Agrowtek GrowControl GCX Instruction Manual Download Page 70

Page: 70 / 78

VNC Remote Access

The GCX system has full remote control capabilities using a standard VNC application (virtual network com

puting) on a phone, tablet or computer. VNC applications allow control of the system as if you were at the

screen. VNC connections are secured using 128bit AES encryption and a user-set passcode.

There are a variety of free VNC client applications that can run on any device:

• RealVNC

• TigerVNC

• TightVNC

• UltraVNC

• Mocha VNC Lite

• noVNC

• UltraVNC

Agrowtek currently recommends the free “Real VNC” viewer application:

A VNC application can connect directly to the controller’s local IP address when the vnc viewer application

has access to the local network. If a pc or phone is connected to the wifi or Ethernet network that the con-

troller is on, use the controller IP address to test the VNC application.

1. Locate the Ethernet or Wi-Fi I.P. address of the controller on the Network page:

2. Open the app and press the + button.

Local Network Access

Summary of Contents for GrowControl GCX















































































Search results

Summary of Contents for GrowControl GCX

Reviews:

Agrowtek GrowControl GCX, Instruction Manual, Page: 70 / 78

Search results

Summary of Contents for GrowControl GCX

Reviews: