Electrical Interfaces
AGD155 Product Manual Rev.2.2
Page 35
Pin # Name
Software
Representation
Description
4
Digital_Input_1 (Hall_A) DInPort.bit(0)
Isolated digital input 1 (NPN or PNP, depending
on connection of the common pin of this group).
To use as Hall input, go to the Agito PCSuite
Digital Input page, and configure as Hall A.
The following inputs (2 and 3) will be set
automatically as Hall B and Hall C.
5
Digital_Input_2 (Hall_B) DInPort.bit(1)
Isolated digital input 2 (NPN or PNP, depending
on connection of the common pin of this group)
6
GND
Do not connect
7
PE
PE
8
RTD+
PT100+ (or if Pin 3 is shorted to pin 6)
9
RTD-
PT100- (or PT1000- if Pin 3 is shorted to pin 6)
10 Digital_Input_Common
(1 to 3)
Common pin (power or return, depending on
external connection) for digital input 1 to 3
11 Digital_Input_3 (Hall_C) DInPort.bit(2)
Isolated digital input 3 (NPN or PNP, depending
on connection of the common pin of this group)
12 Digital_Input_4
DInPort.bit(3)
Isolated digital input 4, PNP only. For a
thermostat input, one end is connected to
IO_RTN, the other end is connected here
13 IO_PWR
Internally connected
to connector X14: I/O PWR
pin 1
14 IO_PWR_Return
Internally connected
to connector X14: I/O PWR
pin 2
Connector manufacturer
3M
Mating connector part number 10114- 10314-52A0-008 (Sunchu equivalent: SC-14-3)
Wiring
AWG 26, insulation rated for 100 V
Note – 5V supply limitation
The 5V supply provided at pin 1 is limited to 0.5A per connector. The maximum total
current provided by all the 5V pins in the product is limited to 1.5A.
