Tuning
AGD155 Product Manual Rev.2.2
Page 52
2.
Click
Go to Auto-Tune
. Alternatively, select TUNE-> DESI to open the Auto-Tuning (controller
design) page.
Figure 50. Go to Auto-Tuning page
3.
Click Run Auto-Tune to start Auto-Tuning. It will take a few seconds, or longer for more complex
systems, to calculate the optimum PIV gains for this plant.
Figure 51. Start Auto-Tuning calculation
4.
Once Auto-Tuning is completed, click
Write to Controller
to download the calculated gains into
the controller.
Figure 52. Download the parameters to the controller
