Agilent Technologies NovoCyte Quanteon Operator'S Manual Download Page 51 | Manualshive

Page: 51 / 148

Agilent Technologies NovoCyte Quanteon Operator'S Manual Download Page 51

Installation

NovoCyte Quanteon Flow Cytometer Operator's Guide

51

3

Installation

This chapter provides information on how to install NovoCyte Quanteon
instrument and associated standard accessories, including installation warnings,
space and environment requirements, instructions for lifting and carrying, and
installation procedures.

Installation Warnings

WARNING

Ensure the instrument is powered off and is not connected to the workstation
through the USB cable before installing or relocating the instrument.

WARNING

Do not operate the instrument in an environment where potentially damaging
liquids or gas are present.

CAUTION

Please make sure the instrument is properly connected to the auxiliaries and
reagent containers. Incorrect connections will result in damage to the
instrument or cause operation failure.

CAUTION

Do not loosen or remove any screws or parts other than those specifically
described in the instructions for instrument installation or maintenance.
Doing so may affect instrument performance and void the instrument
warranty.

«
...
49
50
51
52
53
...
»

Summary of Contents for NovoCyte Quanteon





















































































































































Reviews:

No comments