Agilent Technologies Intuvo 9000, Installation And First Startup

Page: 75 / 114

Installing the GC
1
Agilent Intuvo 9000 GC Installation 75
column bus fitting should be flat against the bus, and the
inlet flow chip should lay flat against the bus.
h
Figure 14 Click and run fittings
i
Rotate the clips to hold the inlet chip in place.
Figure 15 Place the inlet chip – check your work
j
Insert the inlet chip Smart ID key into the lower socket to
the right of the bus. See
Figure 10 .
Click and run
ÀWWLQJV
Top of inlet chip
rests in pocket
Inlet chip
Detector chip
Inlet chip routes under wire from
detector chip