Agilent Technologies 54657A, User Manual

Page: 70 / 89

To create a label for a trace memory
Each trace stored in Measurement/Storage Module can have a label up to 20
characters long to identify the stored waveform.
1
Press
Trace
.
2
Press the Edit Label softkey.
A softkey menu with six softkey choices appears. Five of them are related to
editing the message.
•
Enter Enters the highlighted character in the character area into the
message area under the cursor position.
•
Space
Enters a space in the message area under the cursor position.
•
Delete Deletes the character in the message area under the cursor
position.
•
Insert
Toggles the insert function on or off. With insert on, pressing
Enter or Space inserts the character or space into the message before the
character at the cursor position. The rest of the message is shifted to the
right by one character. With insert off, pressing Enter or Space replaces
the character highlighted in the character area.
•
Clear To End
Clears the characters from the cursor position to the end of
the message including the one under the cursor.
•
Done Exits the editing of the message.
3
Turn the Delay knob to move the cursor in the label to the position
that you want to edit.
4
Turn the knob closest to the
Cursors
key to move the cursor in
the character area to select the character that you want to enter.
5
Press the
Enter
softkey to enter the highlighted character into the user
message, or press the
Space
softkey to enter a space into the user
message.
6
Repeat procedures 3 through 5 until finished editing the message.
The maximum length of the label is 20 characters.
7
Press the Done softkey.
Your message is displayed when you execute the various trace functions.
Operating the Measurement/Storage Module
To create a label for a trace memory
2–54