Agilent Technologies 54657A, User Manual

Page: 56 / 89

To automatically save test violations
The signals that fail the waveform monitoring test can be saved, then
viewed/measured at a later time. Provisions are provided to save the
violations in trace memory, or print a hardcopy of the data. When trace is
selected, the option of saving only the last violation, or saving all violations
are provided.
1
Setup for waveform monitoring as described previously.
2
Press ±
.
3
Press the
Mask Test
softkey.
4
Press the Test Options softkey.
5
Press the Auto Save softkey to ON . This causes the Save To softkey to appear.
Determine how the test violations are being saved, and proceed as follows:
•
To print test violation data on an externally connected printer, toggle the
Save To
softkey until
Print
is selected.
•
To save test violation data in trace memory, toggle the Save To softkey
until Trace is selected. This causes the Increment softkey to appear.
•
To save only the last test violation waveform in trace memory, toggle the
Increment
softkey until
Off
is selected.
•
To save all test violation waveforms in trace memory, toggle the Increment
softkey until On is selected.
6
Press the
Previous Menu
softkey.
7
Press the
Mask Test
softkey until
On
is selected.
Operating the Measurement/Storage Module
To automatically save test violations
2–40